Hexipuff bag tutorial!

So here goes.  My first tutorial.  I just took what seems like millions of pictures while I was making this bag.

 Here is the final product:

 

SUPPLIES:
1 fat quarter of outside fabric*
1 fat quarter for inside lining*
1 fat quarter for inside pocket and pocket lining*
decor bond (or heavy interfacing)
nylon zipper (at least 12")
basic sewing supplies

*I had 3 coordinating 1/2 yard cuts for the bag in my tutorial.  You need enough fabric to cut out the pieces.  This is a great project to use up largish scraps.  If you want to use 1/2 yard cuts, feel free, but you will have some fabric left over.  If you DO NOT use 1/2 yard cuts, the pocket outside and lining will be from the same fabric.  I like to have the coordinating tones.  Look at the pictures below to see what I mean.

CUTTING INSTRUCTIONS:
For the bag:
from outside fabric: cut two 10" x 11" pieces (if you're using a directional fabric the long side will be the top an bottom of the bag.)
                                cut a 1" strip that is at least 6" long (for zipper)

from lining fabric: cut two 10" x 11" pieces

from decor bond:  cut two 9 3/4" x 11" pieces

For the Pocket:                              
from fat quarter or lining fabric: cut one 9 3/4" x 11" piece (outside of pocket)

from pocket lining fabric:  cut one 8 1/2" x 11" piece (inside of pocket/coordinating edge)
                                           cut on 2 1/2" x 12" strip (for optional wrist strap)


Last bit of cutting before the sewing begins!  From the outside, lining, and decor bond pieces, measure and cut out a 1 1/2 squares from the bottom corners.  I measure, mark, and then use scissors to cut these out, not the rotary cutter.

 Measure 1/2" squares.

 Cut them out.

Here's all three sets with corners cut out.  I keep the two layers together and just mark the top layer.  This is pretty easy with the fabric.  The decor bond can be a bit slippery.








LET'S SEW! (use 1/4" seams)
Step 1: Prepare your zipper. 
Measure and mark on the zipper 0" and 9 1/2" inches.  If you use a longer zipper you don't have to be near the little metal end that can get in the way.  You should have something that looks like this:

 Next take the 1" strip and cut it into two pieces.  I like them longer rather than shorter.  you'll trim them later on so don't worry too much about the length.  The should be at least 3" long to make your life easier.

Next, you'll pin the two 1" pieces to the zipper.  Line up the edge of the fabric strip with the marking you made earlier. Pin in place. 

 Hint:  make sure that the zipper tab is in between the two pieces you just pinned on.  If you don't, you'll never be able to pen your bag.














Here's both pieces pinned in place.  Note that the nonpinned side of the strip sticks into the middle of your zipper, not the other way around.

Using a 1/4" seam sew the two strips down.
Fold them back so you can see the right side of the fabric.
Top stitch in place.
Trim the ends of the zipper.so it is even with the seam.  This will reduce the amount of bulk you'll be sewing later.  Somehow, I missed taking pictures of this step.
Set zipper aside

Step 2: Make a pocket.

 Take your two pocket pieces (outside and lining)

 Line them up and sew along a LONG end of the pocket using a 1/4" seam.

 Iron open. 

 Fold the lining fabric back behind the main pocket fabric.  These two pieces will now be WRONG sides together.  You should see a 1/4" strip of the lining fabric on the top edge of the pocket.









Top stitch along the upper edge.











Cut out 1 1/2" squares from the bottom corners like you did before.

Line up the pocket with one of the lining pieces.

If you'd like to have pockets on both sides of the bag, feel free to repeat the process to make a second pocket for the other side.

I hate it when items slip down into the bottom of the bag. To prevent this, I measure from corner to corner from the squares I cut out previously. I mark this line and then top stitch in place.  This also helps hold the pocket and lining together.

Hint: I would baste along the edges of the pocket as well.  Then they will be held in place while you complete the rest of the sewing on the bag.  I just used pins, but I wish I had taken the time to baste them.





Step 3: Time to put in the zipper!
Mark the middles of the zipper, lining and outside fabric of the bag.  I just use pins.

Layer the pieces of your bag: lining, zipper, outiside.  The WRONG side of the zipper will be against the lining of the bag, while the right side of the zipper will face the right side of the outside fabric.

 Pin in place, using the middles you marked earlier.  Next, sew in place using a zipper foot on your machine.  I use my fingers to feel where the zipper is and line up the foot.  I like pins.  Definitely use them for zippers.

Repeat for the other side.

Hint: If you have the option of using a needle-down on your machine, use it!  Zippers are fiddly.  I sew part of the zipper and then I unzip/rezip the zipper as needed to get it out of the way of my needle and then finish sewing the zipper.

When you've completed your zipper seams, it opens up to look like something like this.  You can see how the outside fabric has the right side of the zipper.  The little zipper fabric strips are sticking off and it's almost time to trim them.







Here is the reverse side with the pocket and the wrong side of the zipper.

 Iron the zipper seams open.  Take some time to do this.  Make sure the fabric is far enough away from the zipper that it opens and closes freely.

A good trick is to line up the corners that you cout out previously.

 Now it's time to add the decor bond.  Zippers are so fiddly that I decided I didn't want to have to sew through decor bond in the initial zipper seam.

The decor bond is going to be ironed against the WRONG side of the outside fabric. Try to line up the corners that have been cut out.

I lay just one side flat on my ironing board, with the three other pieces sticking off the back.  I take the decor bond and slide it up snug to the zipper seam.  The decor bond sits under that seam allowance.

Iron in place.  Follow the instructions that come with the decor bond or heavy interfacing.

Repeat on the other side.

Now, place the layers back in place so that you can see the zipper.

Top stitch the zipper in place.  This will catch the decor bond you just ironed on.











Step 4: Make a strap.  This is optional.  If you don't wan the strap, just skip to the next step.

 Take the 2 1/2" x 12" strip and iron in half.

 Open it up, and then fold the two raw edges into the middle.

 Here you can see them both ironed to the middle

 Iron flat.

Top stitch along both long edges.

 Place the strap on the size of the bag where the zipper tab is when it's closed.I measured about an inch down and pinned my strap in place










Step 5: Time to sew the bag together!  Let the fun begin!

If you haven't trimmed the fabric strips from the end of the zipper, do that now.  Trim them so they are even with the side of the bag.

You're going to pin the lining pieces together and the outside pieces together. 

HINT: make sure you leave the zipper at least half way open.  If you don't, you won't be able to turn your bag right side out!

 Lots of pins.  Pin all four sides.  Leave a portion open on the bottom of the LINING of the bag.  You need  this so you can turn your bag right side out.

 Sew around the edges.  DON'T sew the corners you cut out.  You'll sew those in the next step to create a bottom for your bag.

 Here you can see the section that I left open to turn the bag.








Step 6: Create the bottom of your bag.

 Open the seams up and match them in the middle.  This is creating a squared bottom to the bag.

Using 1/4" seams sew along all four corners.

Here you can see the bottom of the outside of the bag. (inside out)  This is a better picture to show how the seams come together and you sew the edges together.








Step 7: Turn the bag right side out through the opening in the bottom of the lining.

Use your fingers to push out the corners of the bag.
Open up the zipper all the way and push the edges of it out as well.

 I iron 1/4" seams on the opening.

 Pin it and sew it shut with a blind hem stitch or whip stitch.  You could also just use a straight stitch on the machine and close the opening if you wish.

 Push the lining into the bag.  You're done!

 Here's a picture of the pocket.


Thought: you could create multiple pockets by adding some top stitching on the pocket.






Step 9: Enjoy your new hexipuff bag!

 

Please use this tutorial for personal use only.

New To-Go Singlet Style Bag...with a few issues

March 7: Let's see it's the 7th day of national craft month, and yes, I have crafted something everyday.  Yesterday I got my hair done (yay!) and while I was waiting for the color to be done I knitted a hexipuff.

I've decided that I want to accent each of the different colors of hexipuffs with plain hexipuffs.  I found some charcoal grey yarn at Fabric.com (love them!)  So I ordered a few skeins of that yarn.  I'm going to be making tons of hexipuffs in that color.  But I think it's going to turn out cool.

Total Hexipuffs: 8!

Today, I tackled making a singlet style (i.e. like the plastic bags in the store) reusable bag.  I found this awesome tutorial from Crafty Ady.  I decided that I wanted to make the bag lined.  I don't like having raw edges sticking out and I also didn't have pinking shears handy.  I also found some bright pink piping in my random notions box.  Here's what I ended up with:

 Here it is all rolled up.  I added a wrist loop so I can easily carry it into a store.  Sometimes I go into stores and I don't know if I'm going to buy anything and carrying one of my larger bulkier bags is kind of a pain.

This one will be easy to carry.

My bag doesn't roll up as little as the tutorial's version.  I think this is because I lined the bag.   There is just more bulk to roll up. 

This is the close up of the flap that holds the bag together when it is rolled up.  I had these bright lime mini pompoms that I added.  I wanted to use the bring pink piping, but I ran out of piping.

'


Here you can see the bag opened up.  I added the pink piping.  The original tutorial doesn't have this.  It's pretty easy to add when you line the bag. 

 Showing off the inside lining.  I just used regular black cotton to line the bag.  The outside is a home decor weight remnant I found at JoAnn's.

Here you can see the flap.  I used a magnetic clasp to hold it closed.

Note to self:  Add the magnetic clasp BEFORE you sew the bag shut!

Another note:  if you want to line the bag, don't sew the handles together.  You need to leave them open in order to turn the bag right sides out.  I learned this the hard way.

I didn't want to take out all the stitches so I just cut the seam that was there.  This means that I lost a little bit of the length.  I attempted to flat felled the seams, but they are a bit messy.  The piping makes it nearly impossible.

What I'd change when I make another:  measure where the middle of the bag is for starting the piping.  I didn't show it, but the joining of the ends of the piping isn't in the middle so the flap looks like it's off center and I'm one of those people that likes things symmetrical.  But you learn from your mistakes.  I think it's still a good result and I'll use it.  I need to figure out a better way to close the open ends of the handles if I want to use piping again.  Either it needs to be a really large flat felled seam or some other way to close it.

New Knitting Project Bag

 March 5:  So here we are on day 5 of national craft month.  I decided to make a new knitting project bag today.  I wanted something with a zipper.  So I looked around and came across this one at Miso Crafty. 

I thought to myself, "I can make one for myself!"

 So I drafted my own pattern and this is the result.  At first I was trying to do things the hard way and just wasn't using my brain, but then I figured it out.

I might make for the shop.  I'll have to think about it.

 <-- Here is a side view.  Basically it's like a giant make up bag.  I added the ric rac just for giggles.  It was sitting on my ironing board and happened to match perfectly.

And of course you  must have awesome purple zebra print inside!  There is a pocket on one side that isn't show very well.   Taking pics at night doesn't always work so well.

 And here's an "in action" shot.  My hexipuffs are sticking out of it.  In fact, that's probably what's going to live in this bag for awhile anyways.  They are so addicting!

Last, but not least, my finished hexipuffs.

Total hexipuffs: 6 (and one just started on needles)